Frapol Onyx Sky 3000 antiallergic kit set of replacement filters for the recuperator
Frapol Onyx Sky 3000 a set of air filters.
The set allows the filtration of the second degree of air purification from minor contaminants, including allergens.
High-quality air filters made of a filter medium with their structure and properties similar to the medium used in the production of absolute filters, i.e. HEPA. Sets of environmentally friendly filters for Frapol Onyx Sky 3000 recuperators are made of innovative, high-performance materials that allow to create antiallergic filters distinguished by high tightness and a durable and stable structure, allowing to maintain a very high level of filtered air quality in HVAC systems. We have achieved this effect through the use of an innovative, high-performance filter medium. In the mechanical ventilation system, the air handling unit is responsible for maintaining the level of comfort and safety through the quality and parameters of the air. To a large extent, this task depends on the quality of the filters used. Their properties and quality have a direct impact on the operation of the recuperator. They also protect sensitive elements of the ventilation system, and at the same time contribute to the freshness of the air supplied to your home. It is important that they protect the elements of the ventilation system and ensure decent air purity. They also have a great impact on protecting the health of users of a facility equipped with a recuperation system. To meet the expectations, we have prepared professional sets of filters for Frapol Onyx Sky 3000 recuperators, allowing for effective, efficient and long-lasting filtration. Including highly effective air purification from fine particles, i.e. larger bacteria, accumulated soot, cement dust, allergens and other pollutants smaller than 2.5 μm (micrometers) to ensure the best possible conditions. When you need antiallergic filters designed for the Frapol Onyx Sky 3000 recuperator taking into account your needs and long-term, reliable and efficient operation of the ventilation system - you can buy them here. The air filters produced by us in Poland have appropriate markings allowing for proper installation in the recuperator. Dedicated filter sets for Frapol Onyx Sky 3000 mechanical ventilation units are made in accordance with the latest air filtration standards ISO 16890 and EN 779, thus confirming the highest quality of the product. Installation of professional filters with a durable, tight construction. Distinguished by a very large filter surface, it guarantees precise long-term retention of pollutants, increasing the comfort and safety in your home through the constant full protection of sensitive elements of the ventilation system and a precise air filtration process.
The prepared set of filters for the Frapol Onyx Sky 3000 recuperator is equipped with two highly efficient filters, one intermediate filter for the filtration of the exhaust air and one fine filter for the filtration of the supply air.
The replacement set of filters for the Frapol recuperator Onyx Sky 3000 includes 2 air filters:
Supply air filter: 1 pc MF/MPT/CRDS F7 EPM1 60% 400x760x100 mm
Extract air filter: 1 pc MF/MPT/CRDS M5 EPM10 55% 400x760x100 mm
Article number Frapol Onyx Sky 3000:
Related products: filters with different filtration properties in the appropriate dimensions adapted to the Frapol Onyx Sky 3000 mechanical ventilation units.
Filter data sheets;
Filter dimensions: (height x length x depth) check before buying should be the same as the currently used filters.
Filters are subject to periodic replacement depending on the environmental conditions, most often it is from 3 to 6 months.
Filters are made in accordance with the requirements of the ISO 9001 Quality Management System, which ensures that the product maintains the highest quality at all times.
Filters fit Frapol Onyx Sky 3000 - a product manufactured by Murano Feniks.
Name and brand used to identify the product.
General information on filters and their replacement in the recuperator
Selection of filters according to expectations and needs, how to distinguish them from each other?
Every user of a mechanical ventilation system, commonly known as recuperation, has once struggled with the choice of air filters for their device. Don't know where and where to buy recuperator filters. It is not an easy task, so we are here to help. Each filter should have a rating label specifying the filtration class in accordance with the currently adopted standards, i.e. EN 779: 2012 and ISO 16890. Standard EN 779 divides filters into several groups marked with letters, i.e. G (coarse), M (medium), F (accurate), E, H, U (highly effective - used in hospitals, military industry, etc.). Next to the letters there are numbers indicating the filtration efficiency in a given group and the entire scale ranging from 1-17. To evaluate the filtration efficiency in the EN 779 standard, an aerosol with a uniform particle size, ie 0.4 µm for filtration classes M5 - F9, is used. For coarse filters G1 - G4 there is a dust called ASHRAE consisting of fine mineral dust (72%), carbon black (23%) and cotton fibers (5%), these particles are close to 80 µm. The highly effective EPA, Hepa, Ulpa filters are tested with a paraffin oil mist aerosol, sodium chloride aerosol, DEHS aerosol (diethylhexyl sebacate polydisperse aerosol) or DOP (octyl phthalate monodisperse aerosol).
Coarse filters belong to this group of filtration classes G1 / EU1, G2 / EU2, G3 / EU3, G4 / EU4
They are very good at filtering basic air pollutants such as leaves, insects, hair, sand, ash, plant spores. They are ineffective in the filtration of pollen, fungal spores, fine dust and smog.
Medium filters, which include the filtration classes M5 / EU5, M6 / EU6
As the name implies, the averages are in the middle between the coarse and fine filters, which results in a high level of coarse dirt filtration and the basic filtration of fine filters. Medium filters do a good job of filtering pollen, bacteria and cement dust, which is very fine, but they do not retain smog that is so harmful to health.
Fine filters marked with filtration classes F7 / EU7, F8 / EU8, F9 / EU9
These are the best and most accurate filters that can be used in home recuperation. Fine filters are characterized by very high filtration efficiency of soot, tobacco smoke, oil smoke, bacteria with carrier particles, but also in the case of class F9 smog and allergens, i.e. all pollen. We recommend installing filters of the exact class only on the supply air due to the greater resistance. On the exhaust, we suggest using filters made in lower filtration classes, ie G4 / EU4, M5 / EU5, which will allow you to take care of the environment by reducing electricity consumption and reduce the frequency of recuperator filters replacement.
The latest ISO 16890 standard has been in force since 2018. It consists in subjecting filters to filtration tests of particles of various sizes, which are included in the DEHS aerosol (diethylhexyl sebacate polydisperse aerosol). DEHS consists of particles with a diameter of 0.2-3 microns. The filtration efficiency is not expressed in numbers but as a percentage, so we are fully aware of what part of the particles will be filtered from the air by our new coarse, medium or fine filter. The ISO 16890 standard defines four new groups of filters based on the size of dust particles, allowing for simpler and more practical selection of filters according to the expectations and needs of customers. It also allows you to precisely determine the filtration efficiency of a given filter material used in the production of the filter. How does the buyer know where the most effective filter is in the filtration of the most harmful particles.
• ISO Coarse: estimates for the separation of new ISO A2 dust (natural dust);
• PM10: for particle sizes ≤ 10 μm;
• PM2.5: for particle sizes ≤ 2.5 μm;
• PM1: for particle sizes ≤ 1 µm.
The described standard of filtration was introduced in order to more accurately present the users of mechanical ventilation with the level of filtration efficiency of filters in relation to the size and amount of particles retained by them that have a harmful effect on the body. We mean mainly PM2.5 and PM1 particles. Below the size of harmful dusts and their ability to penetrate the body.
• Particles larger than 10 µm (ISO Coarse) are retained by the upper respiratory tract and are not inhaled;
• Particles smaller than 10 µm in diameter (PM10) can penetrate the bronchi;
• Particles smaller than 2.5 µm in diameter (PM2.5) can penetrate the alveoli;
• Particles with a diameter below 1 µm (PM1) can penetrate the vesicle-capillary barrier and get into the blood, this group includes smog particles.
When buying recuperator filters that meet the above-described ISO 16890 standard, which comply with the currently applicable EU regulations and are admitted to trading. Should have the ISO 16890 filtration standard specified in the product description. The filter rating label, in addition to the size, should also include the filtration standard ISO 16890 and graphic information showing the direction of air flow, e.g. an arrow. The reverse assembly of the filters from the one compatible with the air flow results in a very quick wear of the filter for mechanical ventilation with heat recovery, called recuperation, because the filter is a sieve that thickens towards the air outlet and filters smaller and smaller particles along with the concentration.
Which air filters should be installed on the supply and which ones on the exhaust and the choice of the filtration class?
It is best to install an air filter from the fine group (F7 - ePM1, F8 - ePM1, F9 - ePM1) on the supply air, i.e. the air flowing into the house. This will filter out the most harmful particles of smog and other unnatural dusts. On the exhaust, we suggest installing coarse or medium filters (G4 - ISO Coarse, M5 - ePM-10) The air flowing into the house has been cleaned by a filter mounted on the supply, so there is no need to install filters with the same or higher filtration efficiency on the exhaust air, i.e. the removed air from the building. The installation of fine filters on the supply and exhaust air will increase electricity consumption and air resistance as well as faster filter wear.
Which filter frame to choose?
It is an individual matter. Metal and plastic frames are less susceptible to mechanical damage during transport, they withstand maximum humidity and during assembly they allow for reliable replacement without fear of damage. The cardboard frame is more delicate, but its important feature is environmental friendliness during disposal.
Recuperator air filters replacement - how to do it yourself?
• Prepare the air handling unit for filter replacement (disable or activate the filter replacement mode);
• Open the inspection hatch or flaps;
• Take out the old filters;
• Clean the guides;
• Insert new filters with the arrows in the direction of air flow (pay attention to the filtration class, a higher class can be used on the supply air);
• Restart the device by restarting it.
I am looking for a filter for my mechanical ventilation, house, apartment, recuperator - where can I order such filters?
• Write to us, we will present an offer and produce filters.
• In the e-mail, please provide the brand and model of the device as well as the dimensions of the currently installed air filters.
• And in the attachments you can attach photos of the filters currently installed and the name plate of the device.
We make air filters for every air handling unit, recuperation and mechanical ventilation systems. On this page you will find filters that will meet your expectations, because when you are looking for an economical solution, we have them, and when you want to fully protect the health of your household, we also offer such filters.
- Filter set variant
- Antiallergic kit
- Marka Modelu Centrali Wentylacyjnej
- Frapol Onyx Sky 3000
You might also like
16 other products in the same category:
No customer reviews for the moment.